Updated Nov 16, 2026· 6 min read

Key takeaways

  • Interrupting the update. Pulling the cable or letting the PC sleep is the main way to cause a failed flash.
  • Using a USB hub. Power drops on cheap hubs can cause a stalled update.
  • Using a charge-only cable. The device may charge but never appear in the software.
  • Running two vendors’ tools at once. Several RGB or peripheral suites fighting over the same device can block the update. Close the others first.
  • Skipping the dongle. With wireless sets, updating only the mouse and leaving the receiver on older firmware may cause pairing trouble if the maker lists both parts.
  • Downloading firmware from unofficial sources. Stick to the maker’s tool.

To update peripheral firmware, install the maker’s own companion software for that device (for example Logitech G HUB, Razer Synapse or Corsair iCUE), connect the mouse, keyboard or headset directly to a USB port on the PC, open the device page, and run the firmware update it offers while keeping power and the connection untouched until it finishes. Firmware is stored on the peripheral itself, so the process is different from a Windows driver update, and the maker’s tool is the safe route.

What peripheral firmware is and why it gets updated

Firmware is the small program that lives inside a mouse, keyboard, headset, controller or receiver and tells the hardware how to behave. Makers release firmware revisions for reasons such as fixing wireless dropouts, adjusting battery reporting, adding profile features or improving compatibility. Release notes in the maker’s software or support page state what a given version changes, and that is the best way to judge whether an update matters for you.

It is not required to update every time a new version appears. If a device works as expected, many users read the release notes first and update only when a fix or feature applies. If you do see a problem, firmware is a reasonable early step, alongside checking cables and ports.

Quick reference by brand type

Maker software Typical devices Where firmware options usually appear Note
Logitech G HUB G-series mice, keyboards, headsets Device settings page, where an update prompt appears if one is available Some Logitech products use a separate updater tool; check the maker’s support page for your model
Razer Synapse Razer mice, keyboards, headsets Device tab, with a firmware notice when an update exists Some products need a particular Synapse version
Corsair iCUE Corsair keyboards, mice, headsets, receivers Device settings, often with a firmware update button Wireless products may need the dongle and device connected together
SteelSeries GG Mice, keyboards, headsets Engine or device pages Menu names vary by version
Controller makers (Xbox, PlayStation, 8BitDo) Gamepads A console, a dedicated app or a maker’s update tool Often requires a USB cable rather than wireless

Menu labels change between software versions, so treat the locations above as typical rather than exact and follow your maker’s documentation.

Step-by-step process

  1. Identify the exact model. Look at the label on the underside or the device page in the software. Variants such as wired and wireless versions can use different firmware.
  2. Find the maker’s tool. Download the companion software from the maker’s official support page. Avoid third-party firmware files from forums, since a wrong file can leave a device unusable and may void the warranty.
  3. Prepare power. Charge a wireless device well above half, or plug it in if the maker allows. On a laptop, connect the charger.
  4. Use a direct USB port. Plug into a port on the PC itself, not an unpowered hub or a front-panel extension that is known to be flaky. Close games and other software that talks to the device.
  5. Open the device page and look for a firmware notice. If the software shows an update, read the release notes first.
  6. Start the update and leave everything alone. Do not unplug the device, close the software, put the PC to sleep or shut it down. The device may disconnect and reconnect several times, which is normal for many products according to maker guides.
  7. Confirm the result. After the tool reports success, check the firmware version shown in the software and test buttons, lighting and wireless connection.
  8. Restore settings if needed. Some updates reset onboard profiles, so re-apply your saved profile or export it beforehand.

Wired, wireless and receiver devices

Device type Common approach Caution
Wired mouse or keyboard Update through the maker software over USB Do not unplug mid-update
Wireless with USB dongle Update device and dongle as the software directs, sometimes separately Keep the dongle in a direct port; both parts may need updating
Bluetooth-only device Some makers require a cable or a specific app Follow the manual; wireless updates are less forgiving
Gamepad Maker’s app, console or cable update Use a data-capable USB cable, not a charge-only one
Headset and base station Update through maker software with base connected by USB Battery should be sufficiently charged

Decide: update now or wait?

Situation Reasonable action
Device has a problem the release notes mention Update, following the maker’s steps
Everything works, notes only add features you do not use Update when convenient, or skip
You are in the middle of a tournament or work deadline Wait until the device is not needed for a while
Update fails or stalls Do not keep unplugging; follow the maker’s recovery instructions or contact support
Device is old and the software no longer lists it Check the maker’s support page for legacy tools

Common mistakes

  • Interrupting the update. Pulling the cable or letting the PC sleep is the main way to cause a failed flash.
  • Using a USB hub. Power drops on cheap hubs can cause a stalled update.
  • Using a charge-only cable. The device may charge but never appear in the software.
  • Running two vendors’ tools at once. Several RGB or peripheral suites fighting over the same device can block the update. Close the others first.
  • Skipping the dongle. With wireless sets, updating only the mouse and leaving the receiver on older firmware may cause pairing trouble if the maker lists both parts.
  • Downloading firmware from unofficial sources. Stick to the maker’s tool.

If something goes wrong

If the device is no longer detected after an update, first unplug it, wait a few seconds and try another port and cable. Restart the maker’s software and, if offered, use its repair or recovery function. If the device still does not respond, stop and contact the maker’s support; repeated forced flashing attempts can make matters worse and some warranties exclude damage from unofficial firmware.

Before you start: a short checklist

  • Close games, launchers and any other peripheral or RGB software so only one tool talks to the device.
  • Use the cable that came with the device where possible, since cheap cables can be charge-only or unreliable for data.
  • Note your current firmware version so you can confirm the change afterwards and report it to support if needed.
  • Export custom profiles, macros and lighting presets if the software offers it, because some updates restore factory defaults.
  • Set aside a few minutes. Many updates take only a short time, but wireless sets with a receiver can take longer because each part may be flashed in turn.

Treat the maker’s release notes as the authority. If they warn that a version is only for a certain hardware revision, match it to the label on your device before proceeding.

Frequently Asked Questions

Is firmware the same as a driver?

No. A driver is software on your PC that lets Windows talk to a device, while firmware runs inside the device. Updating one does not update the other, and many peripherals use Windows’ built-in drivers anyway.

Can I update peripheral firmware over Bluetooth?

It depends on the maker and model. Some require a USB connection for safety, and the maker’s manual states which method is supported. When in doubt, use the cable.

Will an update erase my settings?

It can on some products, particularly onboard profiles and lighting. Export or note your configuration beforehand if the software allows it, and expect to reapply it afterward.

How do I know which firmware version I have?

The maker’s software normally lists it on the device or about page. Some products also show it in a support tool, and the maker’s support page lists the latest release for comparison.

Is it safe to update on a laptop running on battery?

It is wiser to plug the laptop in, because an unexpected shutdown during a flash can corrupt the update. The same applies to a low-battery wireless device.

Do I need to update a brand-new device?

Not always, but new stock can ship with an older version. Reading the release notes in the maker’s software tells you whether the newer firmware addresses anything you care about.

A
Aiden Cooper
We compare specs, materials and verified owner reviews before a product earns a spot. Rankings are never paid.

FAQ

Is firmware the same as a driver?
No. A driver is software on your PC that lets Windows talk to a device, while firmware runs inside the device. Updating one does not update the other, and many peripherals use Windows’ built-in drivers anyway.
Can I update peripheral firmware over Bluetooth?
It depends on the maker and model. Some require a USB connection for safety, and the maker’s manual states which method is supported. When in doubt, use the cable.
Will an update erase my settings?
It can on some products, particularly onboard profiles and lighting. Export or note your configuration beforehand if the software allows it, and expect to reapply it afterward.
How do I know which firmware version I have?
The maker’s software normally lists it on the device or about page. Some products also show it in a support tool, and the maker’s support page lists the latest release for comparison.
Is it safe to update on a laptop running on battery?
It is wiser to plug the laptop in, because an unexpected shutdown during a flash can corrupt the update. The same applies to a low-battery wireless device.
Do I need to update a brand-new device?
Not always, but new stock can ship with an older version. Reading the release notes in the maker’s software tells you whether the newer firmware addresses anything you care about.
Affiliate disclosure. As an Amazon Associate we earn from qualifying purchases at no extra cost to you. Prices accurate as of the date shown.

More from Amazon

Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.

Amazon Prime

Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.

Start a Prime free trial
Amazon Music Unlimited

Ad-free music streaming. Eligible new subscribers can start with a free trial.

Try Music Unlimited free
Prime for Young Adults

A Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.

See Prime for Young Adults
Audible

Audiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.

Try Audible free

As an Amazon Associate we earn from qualifying purchases.