Key takeaways
- To lube mechanical keyboard switches, you remove the keycaps, open each switch.
To lube mechanical keyboard switches, you remove the keycaps, open each switch, apply a thin film of switch-appropriate lubricant to the moving surfaces, reassemble, and test. The goal is a smoother, quieter keystroke, not a wet one, so less product applied evenly beats more applied carelessly. The job takes patience more than skill, but it is easy to overdo.
Before you start, know that lubing is optional, that it can void a warranty on some boards, and that it works only on switches that can be opened or are designed for it. This walkthrough covers the tools to gather, the order of steps, how to choose the right lubricant weight for different switch types, and how to avoid the mistakes that make a keyboard feel worse in 2026 than it did before.
Is Lubing Worth It for You?
Stock switches often have small amounts of scratchiness where the stem slides against the housing, and springs can ping when pressed. Lube reduces friction between those parts and can dampen spring noise. It will not change the switch type: a clicky switch stays clicky, and a linear one stays linear, though both may feel smoother.
If your keyboard has hot-swappable sockets, you can remove switches without soldering and work on them at a table. If the switches are soldered, you can still lube them without desoldering by removing the stem only, but that is more limited. Consider whether you want to spend an evening on sixty or more switches, or on a single test batch first.
Tools and Materials
| Item | Purpose | Notes |
|---|---|---|
| Keycap puller | Removes keycaps without damage | Wire style is gentle on caps |
| Switch puller | Removes hot-swap switches | Needed only for hot-swap boards |
| Switch opener | Opens the housing | Match to your switch shape |
| Fine brush | Applies a thin film | Small, soft and clean |
| Switch lubricant | Reduces friction | Choose a weight for the switch type |
| Tweezers | Handles springs and small parts | Plastic tips protect parts |
| Container and tray | Organizes parts | Prevents mix-ups |
Step-by-Step Process
1. Prepare and Remove the Switches
Power off the board and unplug it. Pull the keycaps and set them aside. For hot-swap boards, pull the switches straight up with the puller, taking care not to twist. Mark or photograph the layout so you know where each switch goes, and keep a small tray to hold parts in order. Work on a clean surface with good light.
2. Open the Switch
Use the switch opener to separate the top housing from the bottom. Remove the stem and spring and set them in order. Some switches have a small slider or a stem that fits in a specific orientation, so look closely before you pull anything apart. If a switch resists, stop and check that you are using the right opener for its shape.
3. Apply Lubricant
Use a thin layer with the brush. Light coats go on the stem sides and rails where the stem slides, and a little on the bottom housing where the stem contacts. Avoid the metal contact leaves and the underside of the stem where electrical contact happens. Springs can be lubed lightly to reduce ping, but use a very small amount, since too much makes the switch feel mushy.
4. Reassemble and Test
Put the spring and stem back, close the housing and press it a few times by hand. It should move freely without sticking. Reinsert it in the keyboard and test it with a typing tester or text field before moving to the next one. If a switch feels sticky or sounds wet, open it again and wipe off the excess.
Choosing Lubricant Weight
Lubricants come in different viscosities. Thin oils flow easily and suit smooth linear switches where you want minimal drag and some sound dampening. Thicker greases stay in place and help reduce rattle and stem wobble, but they slow the stroke more. Tactile switches need care: heavy lube on the bump area can dull the feel, so many people use only a thin film on the rails. Always check that the lubricant is rated as safe for plastics, since some products attack certain switch materials over time.
What to Avoid
- Do not use household oils, cooking spray or sprays that can damage plastic.
- Do not lube the electrical contact leaves or the PCB.
- Do not over-apply; a gleam on the surface is enough.
- Do not mix up parts from different switch types.
- Do not rush; one switch at a time prevents mistakes.
Before You Start Checklist
- Check whether your keyboard is hot-swappable and whether the switches can open.
- Confirm warranty terms before modifying.
- Choose lubricant weights for your switch type.
- Test on a few spare or less-used switches first.
- Gather a tray, brush, tweezers and good lighting.
- Set aside several hours for a full board.
Related Tweaks That Work With Lubing
Lube is only one part of a smoother keyboard. Stabilizers on the longer keys, such as the space bar, enter and shift, often cause more rattle than the switches. Lightly lubing the stabilizer wires and housings can reduce that sound. A small amount of foam or a dampening layer inside the case changes the tone of the typing sound, and keycap material also shapes how the board sounds.
Switch films, which are thin sheets placed between the housing halves, can reduce wobble. They are optional and affect the feel slightly. If you are experimenting, change one thing at a time and keep notes, so you know which change produced which result.
Cleaning Up and Aftercare
When you finish, wipe stray lubricant from the outside of the switches and the board. Keep the lubricant container sealed and stored upright. Let the board sit for a short time, then check for any switch that behaves differently. Over months, you can retest a few switches to see how the lube holds up.
If you decide the result is not to your taste, you can clean the parts with a mild, plastic-safe cleaner and a soft cloth, then try a lighter application. Do not use strong solvents, since they may damage plastic or markings.
Common Mistakes
Over-lubing is the most common, resulting in sluggish, gummy switches. Others include using the wrong lubricant, skipping the test step and discovering a sticky switch after reassembly, and mixing springs between switches. Some people lube the whole board and then realize they prefer the original sound. Testing a small batch avoids that regret.
Plan Your Time and Workspace
A full board is slow work. Many hobbyists lube a handful of switches per sitting, working in batches of ten or twenty and testing as they go. Set up a tray with compartments for housings, stems and springs, and keep them in the same order as the keyboard layout so nothing gets lost. Good lighting and a magnifying lamp reduce eye strain and help you see how much lubricant is on the brush.
Work on a mat that catches dropped springs, which are small and easy to lose. Keep food and drinks away, wash your hands before starting, and avoid touching the inside surfaces of switches with bare fingers. Fingerprints and skin oil can attract dust over time. Finally, keep a few spare switches on hand in case one breaks while being opened.
Related guides
- Gaming Headset Noise Isolation Vs Active Noise Cancellation
- Does Gaming Headset Noise Cancellation Work On Microphone
- Trackir Vs Vr Vs Webcam Head Tracking For Flight Sims
Frequently Asked Questions
Does lubing change the sound?
Yes, it usually reduces scratch and spring noise and can create a deeper, smoother sound. Results depend on the switch, the lubricant weight and how much you apply.
Can I lube switches without opening them?
Some can be lightly treated through the stem opening, but the result is less even. Opening the switch gives better control and coverage.
How long does lube last?
It depends on use, temperature and the lubricant. Many owners find it lasts for a long time, though heavy typing can wear it down eventually.
Will lubing void my warranty?
It may, especially if you open switches or the case. Check the manufacturer’s terms before modifying a board.
FAQ
Is Lubing Worth It for You?
Does lubing change the sound?
Can I lube switches without opening them?
How long does lube last?
Will lubing void my warranty?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.