Key takeaways
- Compare five 3d printing pens for drawing in the air, from a kid-safe starter set to pro models with OLED displays, speed control and filament support.
A 3D printing pen turns a flat sketch into a physical object you can hold. Instead of sending a digital file to a printer bed, you guide molten plastic by hand, building lines, bridges and shells in mid-air as the filament cools and hardens within seconds. The five pens in this guide cover the full range of that experience: a professional model with an OLED display and replaceable nozzle, two versatile MYNT3D pens, a display-equipped starter from SCRIB3D, and a child-safe 3Doodler set with no hot parts at all.
The right pick depends on who is holding the pen. Adult hobbyists usually want wide filament compatibility and fine temperature control, while parents shopping for a first pen should look at nozzle safety, simple controls and the type of plastic the pen uses.
As an Amazon Associate, we earn from qualifying purchases.
Quick Picks
- MYNT3D Professional — the most complete control set here, with an OLED display, adjustable temperature and speed, and a modular nozzle you can swap.
- MYNT3D Super — a slim all-rounder with stepless speed control and a sealed nozzle, suited to drawing sessions.
- 3Doodler Flow — the versatility pick, handling PLA, ABS and wood-filled filament with an LCD temperature readout and auto shut-off.
- SCRIB3D P1 — a display-equipped starter pen with adjustable speeds and a generous starter kit of PLA and stencils.
- 3Doodler Start+ Essentials — the kid-safe choice for ages 6 and up, with no hot parts, one-button control and a pad and strands in the box.
How to Choose
Filament type comes first. Most pens in this guide use standard 1.75 mm filament in PLA or ABS, which is widely available in dozens of colours and keeps refills simple. PLA is the friendlier everyday material, while ABS suits sturdier builds. The exception is the 3Doodler Start+, which uses 3Doodler’s own eco-plastic strands. That closed system is part of its safety design, but it does mean refills come from one maker only.
Temperature control shapes your results. Pens with a wide, adjustable range, such as the two MYNT3D models and the SCRIB3D P1, let you fine-tune heat for different materials and line thicknesses. A display makes that control far easier to repeat from session to session. Simpler pens fix the temperature for you, which removes guesswork for children but limits the materials you can run.
Speed control matters more than it sounds. Drawing a tall, thin wall needs a slow, steady feed, while filling a panel goes faster with a stronger flow. A stepless slider or adjustable feed settings give you that range in one tool. Fixed-speed pens are easier for small hands, and for simple stencil work they are often enough.
Think about the nozzle. On hot pens the nozzle is the part most likely to clog or wear. A modular, replaceable nozzle, like the one on the MYNT3D Professional, turns a common failure into a two-minute swap instead of a repair job. Sealed nozzle designs, like the MYNT3D Super’s, aim to prevent clogs before they start.
Match the pen to the user. For children under ten, a low-heat or no-hot-parts design should be the starting point, and the Start+ is built exactly for that group. Younger users of hot pens should still be supervised, keep the nozzle away from skin and fabric, and work on a heat-resistant mat.
Check what is in the box. Starter filament, stencils and an activity guide make the first session much smoother. Also confirm how the pen is powered: most plug into an adapter, the MYNT3D Professional can run from a USB power bank, and the Start+ is rechargeable.
MYNT3D Professional Printing 3D Pen
The MYNT3D Professional is the control-focused pick in this lineup. Its large OLED display shows the material temperature as you work, and both temperature and extrusion speed are adjustable, so you can slow the feed for fine detail or open it up for structural lines. The working range runs from 140 to 230 degrees Celsius, covering the melting window of standard 1.75 mm PLA and ABS filament.
The detail that sets it apart for long-term ownership is the modular nozzle. If a clog ever defeats the usual clearing routine, the nozzle assembly can be replaced at home with the included tools rather than sending the whole pen away. The pen is USB powered and works with battery power banks that deliver at least 2A output. The box includes three rolls of ABS filament, an AC adapter, a USB cord, a manual and nozzle replacement tools.
Specs
| Feature | Detail |
|---|---|
| Filament | 1.75 mm PLA and ABS |
| Temperature range | 140–230 °C, adjustable |
| Display | OLED temperature display |
| Speed control | Adjustable extrusion speed |
| Nozzle | Modular, replaceable |
| Power | USB powered; AC adapter included |
| In the box | Pen, 3 rolls of ABS filament, AC adapter, USB cord, manual, nozzle tools |
MYNT3D Super 3D Pen
The MYNT3D Super takes a simpler route to the same wide material support. It is an ultra-slim, lightweight pen with an ergonomic shape designed for long drawing sessions without hand fatigue, and it runs standard 1.75 mm filament in both ABS and PLA. A stepless speed slider lets you dial the flow up or down continuously instead of stepping through presets, which suits the way most people actually draw: slow for outlines, faster for fills.
Temperature is adjusted with a screw-style control rather than a screen, and an LED indicator covers the basics. The ultrasonic sealed nozzle is built to resist clogs, a practical touch on a pen aimed at beginners and hobbyists who would rather draw than maintain their tools. The kit includes three colours of ABS filament, an AC adapter, a USB cord, a manual and repair tools. If you want MYNT3D’s material flexibility without the Professional’s display and modular nozzle, this is the balanced middle of the range.
Specs
| Feature | Detail |
|---|---|
| Filament | 1.75 mm ABS and PLA |
| Temperature range | 140–230 °C, adjustable |
| Speed control | Stepless slider |
| Display | LED indicator |
| Nozzle | Ultrasonic sealed, clog-resistant |
| Power | AC adapter; USB cord included |
| In the box | Pen, 3 colours of ABS filament, AC adapter, USB cord, manual, repair tools |
3Doodler Flow 3D Printing Pen
The 3Doodler Flow is the versatility pick for teens, adults and creators who want one pen that handles several materials. It works with 1.75 mm filaments including PLA, ABS and wood-filled blends, and an integrated LCD screen shows the temperature in real time so you can keep extrusion smooth across material changes. That monitoring is genuinely useful when switching between a standard PLA and a filled filament that behaves differently in the nozzle.
Auto shut-off guards against the pen being left on, and the set arrives with eight colours of plastic spools totalling about 80 feet, plus a stencil book and getting-started guide. It is a full-temperature pen, so it belongs with older users rather than young children, but for a household pen that moves from school projects to hobby prototyping, the Flow covers the widest ground here.
Specs
| Feature | Detail |
|---|---|
| Filament | 1.75 mm PLA, ABS and wood-filled |
| Display | LCD temperature monitor |
| Safety | Auto shut-off |
| Intended users | Teens, adults and creators |
| In the box | Pen, 8 colour spools (about 80 feet total), stencil book, getting-started guide |
SCRIB3D P1 3D Printing Pen
The SCRIB3D P1 is the display-equipped starter in this guide. It pairs an LCD screen with adjustable feed speeds and a temperature range of 160 to 230 degrees Celsius, a combination that gives new users visible settings to learn from instead of guessing. It runs standard 1.75 mm PLA and ABS, so refill colours are easy to find once the included supply runs out.
The starter kit is generous: three colours of PLA totalling about 30 feet, a power adapter, a step-by-step manual and a stencil guide for first projects. SCRIB3D positions the P1 as its entry-level pen, and the controls are spaced for deliberate, unhurried use. For a first hot pen with a screen, it is the most approachable option here.
Specs
| Feature | Detail |
|---|---|
| Filament | 1.75 mm PLA and ABS |
| Temperature range | 160–230 °C |
| Display | LCD screen |
| Speed control | Adjustable feed speeds |
| Power | Wired, power adapter included |
| In the box | Pen, 3 colours of PLA (about 30 feet), power adapter, stencil guide, manual |
3Doodler Start+ Essentials 3D Pen Set
The Start+ Essentials set is the only pen here designed from the ground up for children. It is a child-safe pen for ages 6 and up with no hot parts: the nozzle and the eco-plastic strands stay safe to touch, so young makers can draw, pause and handle their work without the burn risk that comes with full-temperature pens. Controls are reduced to a single button with one speed and one temperature, which keeps the learning curve close to zero.
The set is built for learning from home and classroom-style activities. Inside the box are the pen, a DoodlePad drawing surface, 72 mixed-colour strands of Start plastic, a USB-C cable for recharging and an activity guide. The trade-off is the closed filament system: the Start+ only uses 3Doodler Start strands, so refills come from the same range. For a first pen for a child, that is a fair exchange for the safety design.
Specs
| Feature | Detail |
|---|---|
| Filament | 3Doodler Start eco-plastic strands (proprietary) |
| Safety | No hot parts; child-safe design |
| Age range | 6 years and up |
| Controls | Single button, one speed |
| Power | Rechargeable; USB-C cable included |
| In the box | Pen, DoodlePad, 72 mixed-colour strands, USB-C cable, activity guide |
Products at a Glance
| Product | Filament | Display | Best for |
|---|---|---|---|
| MYNT3D Professional | 1.75 mm PLA and ABS | OLED | Precision work and long-term ownership |
| MYNT3D Super | 1.75 mm ABS and PLA | LED indicator | Everyday drawing with simple controls |
| 3Doodler Flow | 1.75 mm PLA, ABS and wood-filled | LCD | Material versatility for teens and adults |
| SCRIB3D P1 | 1.75 mm PLA and ABS | LCD | First hot pen with visible settings |
| 3Doodler Start+ Essentials | Proprietary eco-plastic strands | None | Child-safe drawing for ages 6+ |
FAQ
What filament does a 3D printing pen use?
Most full-temperature pens use standard 1.75 mm filament, usually PLA for everyday drawing and ABS for tougher builds. The exception in this guide is the 3Doodler Start+, which uses 3Doodler’s own eco-plastic strands as part of its child-safe design, so its refills come from that range only.
Are 3D printing pens safe for kids?
It depends on the model. Pens with heated nozzles, including the MYNT3D and SCRIB3D models here, suit older children and teens with adult supervision. The 3Doodler Start+ is designed for ages 6 and up with no hot parts, which makes it the appropriate starting point for younger children.
Do I need a computer or software to use a 3D pen?
No. A 3D pen is a freehand tool: you load filament, let the pen heat up, and draw. Stencils, a drawing pad and activity guides, all included with several sets here, help beginners produce clean shapes while they build skill.
How do I prevent clogs in a 3D pen?
Match the temperature setting to the filament you loaded, keep the feed steady, and unload the filament properly instead of leaving it to cool inside the nozzle. Sealed nozzle designs resist clogs, and the MYNT3D Professional goes further with a modular nozzle you can replace at home if a blockage cannot be cleared.
Conclusion
For most adult hobbyists, the MYNT3D Professional is the strongest all-round choice here: OLED temperature feedback, adjustable speed, wide filament support and a replaceable nozzle cover both daily drawing and long-term upkeep. The MYNT3D Super keeps the same material flexibility in a slimmer, simpler pen, while the 3Doodler Flow adds wood-filled filament and LCD monitoring for mixed-material projects. The SCRIB3D P1 is the friendliest first hot pen thanks to its screen and starter kit, and the 3Doodler Start+ Essentials stands alone for young children, trading filament freedom for a no-hot-parts design. Pick by the hands that will hold the pen.
FAQ
What filament does a 3D printing pen use?
Are 3D printing pens safe for kids?
Do I need a computer or software to use a 3D pen?
How do I prevent clogs in a 3D pen?
More from Amazon
Programs that pair well with the guide above. Offers and eligibility are set by Amazon and may change.
Free shipping on eligible items, Prime Video and more. Eligible new members can start with a free trial.
Start a Prime free trialAd-free music streaming. Eligible new subscribers can start with a free trial.
Try Music Unlimited freeA Prime membership for ages 18-24 with a trial period. Eligibility is set by Amazon.
See Prime for Young AdultsAudiobooks and podcasts to listen to on the go. Eligible new members can start with a free trial.
Try Audible freeAs an Amazon Associate we earn from qualifying purchases.